Comparison of Adsorption Dryer and Modular-Units Dryer



It’s very key to select appropriate air dryer equipment due to compressed air quality directly affect the various gas equipment and technology process, so modern industrial technology have a very high demand on drying compressed air. at present, commonly-used compressed air dryer are refrigeration dryer and adsorption dryer in industrial production.

Adsorption dryer is the most widely used dryer equipment, which based on the adsorption capacity of adsorbent materials (alumina, silica gel and molecular sieves), especially in the drying technology where the compressed air pressure dew point is less than -40℃. nowadays, adsorption dryer is divided into twin towers, modules and modular-units, the last one is biteman research and develop new type adsorption dryer to solve unstable pressure dew point, high energy consumption,difficult adsorbent filling and other defects compared with original adsorption dryer.



Comparison of the modular-units dryer and the original adsorption dryer



1. Structure: adsorption dryer designed into twin towers structure, A tower is drying adsorption B tower is regeneration; modular-units dryer use alternating double cavity structure;


2. The adsorbent filling method: adsorption dryer need to fill on the spot, modular-units dryer can directly replace the modular-units;

3. Energy consumption: energy consumption of adsorption dryer mainly refers to the power and gas consumption, energy consumption; modular-units dryer mainly mention controller power consumption and low gas consumption without other power loss (except micro-heat models) , heat-less models ≤ 5%, micro-heat type ≤ 2%;


4. Volume: adsorption dryer is much bigger size, modular-units dryer is small size, it can save space;

5. Modular-units dryer does not belong to the scope of pressure vessels, it not only improve the safety performance of equipment, but also save the costs and time of pressure vessel inspection.


Biteman modular unit desiccant dryer and high precision filter---which is not only completely solve the water, oil, dust in the compressed air and other issues to provide technical support, and also greatly reduce energy consumption much than traditional purification equipment.heat-free models need 5% renewable gas consumption, micro-heat models only 2% the re-gas consumption, greatly reducing the energy consumption and production costs.

评论

发表评论

此博客中的热门博文

Modern Planning in the Field of Compressed Air

图片
In the past, people only consider the initial investment and operating energy costs such as some simple economic factors, they often overlook the influence pollutants in the compressed air for system when established a compressed air system , thus ignoring the compressed air quality (it can not reach standard will bring huge invisible waste for enterprises), and these losses are often much higher than the high quality purchase and operating costs of purification equipment. Perhaps many companies believe that compressed air equipment just little impact when select ordinary one, but what will actually appear on us? In the 1980s, the industry lagged far behind today, the developed countries put forward ISO8573 standards for the purity of compressed air as for different gas equipment, while it failed to supply the gas equipment standard of compressed air, which caused serious impact, such as shorten the service life, decrease accuracy, increase failure rate, poor quality, and the safet
阅读全文

The Importance of Brand Awareness

图片
Brand is an invisible asset for the enterprise, it’s also the most valuable wealth. in the rapid development of the modern life, the difference become shrinking for product performance, quality, sales service from different enterprises, so the brand will become the main factor to choose products for consumer. "Stupid businessmen sell products, smart businessmen sell brand" This sentence fully illustrates the importance of the brand for the enterprise . therefore, companies should have enough brand awareness, and strive to run the business brand. it is the core content of the product, and brand awareness isn’t all other means of marketing, such as Atlas, Ingersoll Rand, Sullair, Kobelco, etc. these enterprises prefer to brand recognition rather than products identification , and it’s also become the only element of market choice. Brand not only refers to the product quality, but also includes the appearance, technology, function, utility and others, it need long-term accumulat
阅读全文

“Throw a sprat to catch a herring" to get the maximum benefit in a short period

图片
There is a question, why do we establish business? Companies just considering saving cost regardless of construction of enterprises, but it real should need the cost of consumption. later hear a manager says to the subordinate, " I have to find ways to earn back for company spent every penny", perhaps this is a lot of top management staff thought, which is good point for a top manager, then we will be reach the business target to obtain the greatest benefits in a short period.  It is not so easy to realize how to get the maximum benefit in a short period. such as a lot of leading brands seem to be impeccable, while the leading brand's business is far less flexible than some small businesses for imbalanced development of different regional market, much longer product line, and imbalanced development in different products. it is difficult to develop appropriate products and marketing strategy according to local conditions due to consider the national market. I
阅读全文